Περιγραφή

1.Description:

Photosensitive sensor control switch is used detect current brightness and display.It can set Dark start or Bright start.

2. Features:

1>. Display brightness value.

2>. Default NC output.

3>. Support AC and DC 12V.Do not distinguish between positive and negative for DC power supply.

4>. Three digital tube display.

5>. Power off memory function.

6>. LED indicates output status.

7>. Custom startup mode:Dark start or Bright start.

3. Parameters :

4. Key Description:

‘Set’ : Enter setting mode and setting parameter.

‘+’ : Select mode and Adjust parameter value.

‘-’ : Select mode and Adjust parameter value.

5. Use manual:

Short press ‘set’ and enter setting mode and display ‘P0’ default.Press ‘+’ or ‘-’ to select mode P0 to P3.Adjust parameter by press ‘set’ again.

Menu Settings
Mode	Function	Set Range	Default	Note
P0	Set startup Value	0-999	20	The module starts when brightness reaches this value
P1	Set startup Mode	0/1	0	0:Dark start; 1:Bright start
P2	Error value	1-500	10
P3	Calibration	1-50~50	0	Correction value

Note: It will restore default settings after 5second for press ‘key +’ and ‘key -’ at same time.

6. Application:

1>. Stairs

2>. Aisle

3>. Wardrobe

4>. Home

5>. Warehouse

6>. Studio

XH-M198 digital luminance control switch